Ok so here they are... Short story - My friend and I milled these for a DIY Timberframe house that I never got around to building. They are now in the back yard of my lesser (stick framed) house that is under construction. I would love to see them put to good use.
http://www.woodweb.com/exchanges/lumber/posts/487046.htmlDescription:
Lot of Bandsaw Milled Timbers - Predominantly (85%)Red Oak
Approximately (195) timbers total (20)8x8,(30)6x8,(50)6x6,(15)4x6
Ranging in length from 18' to 10'.
Approximately (50)3x6" x 8-foot and (30)3x<6"x 8'
I'd estimate that approximately 85% of the beams are straight. They have been kept dry covered with metal roofing and have air dried for approxiimately 10 years! They have developed a nice patina and are in good condition. I recently measured the moisture content in 3 beams at 12% with a mini ligno meter.
Located in Connecticut.
6,500 board feet total $1.50 bd-ft or best offer.
