flattening backs

Print Thread

Rate Thread

Re: flattening backs [Re: Mark Davidson] #22917 03/03/10 01:47 PM
Joined: Apr 2002 Posts: 895 Minneapolis, Minnesota daiku Member
daiku Member Joined: Apr 2002 Posts: 895 Minneapolis, Minnesota	Are these laminated chisels that you are flatteing with hammer on teh anvil? I would think the hardened layer on the back would not tolerate that kind of impact. CB. -- Clark Bremer Minneapolis Proud Member of the TFG

Entire Thread
Subject	Posted By	Posted
flattening backs	timber brained	03/02/10 01:43 PM
Re: flattening backs	bmike	03/02/10 02:43 PM
Re: flattening backs	Dave Shepard	03/02/10 11:19 PM
Re: flattening backs	TIMBEAL	03/03/10 12:19 AM
Re: flattening backs	brad_bb	03/03/10 02:27 AM
Re: flattening backs	Mark Davidson	03/03/10 03:02 AM
Re: flattening backs	brad_bb	03/03/10 04:17 AM
Re: flattening backs	mo	03/03/10 04:29 AM
Re: flattening backs	bub4e	03/03/10 06:04 AM
Re: flattening backs	Mark Davidson	03/03/10 01:06 PM
Re: flattening backs	daiku	03/03/10 01:47 PM
Re: flattening backs	Jim Rogers	03/03/10 01:49 PM
Re: flattening backs	timberwrestler	03/03/10 05:19 PM
Re: flattening backs	Mark Davidson	03/03/10 10:22 PM
Re: flattening backs	Dave Shepard	03/03/10 11:26 PM
Re: flattening backs	Chris Hall	03/05/10 10:46 PM
Re: flattening backs	TIMBEAL	03/05/10 11:54 PM
Re: flattening backs	timber brained	03/09/10 01:58 PM
Re: flattening backs	timber brained	03/09/10 02:07 PM
Re: flattening backs	TIMBEAL	03/11/10 01:47 AM
Re: flattening backs	brad_bb	03/11/10 04:04 AM
Re: flattening backs	Jim Rogers	03/11/10 01:48 PM
Re: flattening backs	Mark Davidson	03/12/10 11:49 AM
Re: flattening backs	daiku	03/12/10 01:36 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.170s Queries: 16 (0.130s) Memory: 3.2287 MB (Peak: 3.4210 MB) Data Comp: Off Server Time: 2024-05-07 08:21:17 UTC
Valid HTML 5 and Valid CSS