Drill bit identification - Timber Frame Forums

Register Log In Timber Framers Guild Forums Tool Forum Drill bit identification

Print Thread

Rate Thread

Re: Drill bit identification #24408 09/17/10 12:27 PM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	What does the bottom of the hole look like, round or flat? It also appears the bit wandered in the hole or is it just the angle of the photo? Did the CF forum come up with any answers? Tim

Entire Thread
Subject	Posted By	Posted
Drill bit identification	Ken Hume	09/15/10 03:14 PM
Re: Drill bit identification	Cecile en Don Wa	09/16/10 06:33 PM
Re: Drill bit identification	Dave Shepard	09/17/10 12:24 AM
Re: Drill bit identification	Ken Hume	09/17/10 07:56 AM
Re: Drill bit identification	TIMBEAL	09/17/10 12:27 PM
Re: Drill bit identification	Will Truax	09/17/10 03:41 PM
Re: Drill bit identification	Ken Hume	09/17/10 04:13 PM
Re: Drill bit identification	Will Truax	09/17/10 04:19 PM
Re: Drill bit identification	Ken Hume	10/06/10 08:36 AM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

CharlieM, Bradyhas1, cpgoody, James_Fargeaux, HFT
5138 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.072s Queries: 15 (0.052s) Memory: 3.1612 MB (Peak: 3.4026 MB) Data Comp: Off Server Time: 2024-06-02 11:58:27 UTC
Valid HTML 5 and Valid CSS