drill guide advice

Print Thread

Rate Thread

Re: drill guide advice #25851 03/09/11 02:43 PM
Joined: Jan 2008 Posts: 918 Burlington, VT B bmike Member
bmike Member B Joined: Jan 2008 Posts: 918 Burlington, VT	I second Clark's advice. Before I had a mortiser I used a drill... with a simple square as a guide (or one of Clark's mirrors) - you get good at it. Mike Beganyi Design and Consulting, LLC. www.mikebeganyi.com

Entire Thread
Subject	Posted By	Posted
drill guide advice	Liam O'Neill	03/04/11 07:14 PM
Re: drill guide advice	Will B	03/04/11 10:11 PM
Re: drill guide advice	TIMBEAL	03/05/11 12:17 AM
Re: drill guide advice	Dave Shepard	03/05/11 12:54 AM
Re: drill guide advice	Liam O'Neill	03/05/11 03:02 AM
Re: drill guide advice	TIMBEAL	03/05/11 03:29 AM
Re: drill guide advice	D L Bahler	03/05/11 06:23 AM
Re: drill guide advice	Will B	03/05/11 02:52 PM
Re: drill guide advice	D L Bahler	03/05/11 03:18 PM
Re: drill guide advice	Liam O'Neill	03/05/11 03:22 PM
Re: drill guide advice	daiku	03/09/11 02:32 PM
Re: drill guide advice	bmike	03/09/11 02:43 PM
Re: drill guide advice	Gabel	03/09/11 05:20 PM
Re: drill guide advice	Joel McCarty	03/09/11 09:59 PM
Re: drill guide advice	Colton Allen	03/11/11 12:33 AM
Re: drill guide advice	Will B	03/25/11 02:47 PM
Re: drill guide advice	Pete Ladd	03/31/11 02:28 AM
Re: drill guide advice	TIMBEAL	03/31/11 03:05 AM
Re: drill guide advice	Liam O'Neill	04/05/11 01:22 AM
Re: drill guide advice	TIMBEAL	04/05/11 11:46 PM
Re: drill guide advice	Devin Smith	04/06/11 03:32 PM
Re: drill guide advice	TIMBEAL	04/06/11 03:56 PM
Re: drill guide advice	bmike	04/06/11 06:36 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.160s Queries: 15 (0.115s) Memory: 3.2165 MB (Peak: 3.5816 MB) Data Comp: Off Server Time: 2024-05-15 01:00:00 UTC
Valid HTML 5 and Valid CSS