Mortise shear when in compression

Print Thread

Rate Thread

Re: Mortise shear when in compression [Re: Roger W Nair] #29577 08/31/12 11:51 PM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	Describing a joint with word is at times tricky to put out and receive. How about drawings? Hard to misinterpret a simple sketch. The first picture was perfect.

Entire Thread
Subject	Posted By	Posted
Mortise shear when in compression	borhani	08/29/12 09:52 PM
Re: Mortise shear when in compression	TIMBEAL	08/30/12 01:15 AM
Re: Mortise shear when in compression	borhani	08/30/12 02:35 AM
Re: Mortise shear when in compression	Roger W Nair	08/30/12 04:04 AM
Re: Mortise shear when in compression	borhani	08/30/12 04:06 AM
Re: Mortise shear when in compression	Roger W Nair	08/30/12 03:04 PM
Re: Mortise shear when in compression	borhani	08/31/12 04:29 AM
Re: Mortise shear when in compression	Roger W Nair	08/31/12 02:22 PM
Re: Mortise shear when in compression	borhani	08/31/12 05:10 PM
Re: Mortise shear when in compression	Roger W Nair	08/31/12 09:48 PM
Re: Mortise shear when in compression	TIMBEAL	08/31/12 11:51 PM
Re: Mortise shear when in compression	borhani	09/01/12 01:52 AM
Re: Mortise shear when in compression	TIMBEAL	09/01/12 02:32 AM
Re: Mortise shear when in compression	borhani	09/01/12 04:21 AM
Re: Mortise shear when in compression	borhani	09/01/12 06:12 PM
Re: Mortise shear when in compression	TIMBEAL	09/03/12 10:20 AM
Re: Mortise shear when in compression	borhani	09/03/12 01:49 PM
Re: Mortise shear when in compression	TIMBEAL	09/03/12 04:00 PM
Re: Mortise shear when in compression	borhani	09/03/12 04:36 PM
Re: Mortise shear when in compression	D L Bahler	09/03/12 06:02 PM
Re: Mortise shear when in compression	TIMBEAL	09/03/12 11:41 PM
Re: Mortise shear when in compression	borhani	09/04/12 01:01 AM
Re: Mortise shear when in compression	Craig Roost	09/04/12 03:04 PM
Re: Mortise shear when in compression	Craig Roost	09/04/12 03:21 PM
Re: Mortise shear when in compression	Craig Roost	09/04/12 03:23 PM
Re: Mortise shear when in compression	borhani	09/04/12 03:54 PM
Re: Mortise shear when in compression	borhani	09/04/12 03:38 PM
Re: Mortise shear when in compression	Craig Roost	09/04/12 04:08 PM
Re: Mortise shear when in compression	Craig Roost	09/04/12 04:11 PM
Re: Mortise shear when in compression	borhani	09/04/12 04:20 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.086s Queries: 16 (0.062s) Memory: 3.2556 MB (Peak: 3.5638 MB) Data Comp: Off Server Time: 2024-05-02 16:59:17 UTC
Valid HTML 5 and Valid CSS