Great Rules!!!...and should be not only in the box with the planer, but repeated over and over again while engaged operating the tool...

Boy Roger...That description seems to happen to many of us that use those size "power hand planers." I am so glad it didn't "get flesh and bone" and only killed an apron. Chainsaw chaps (that fit well) aren't even a bad idea with operating these hand power planers.

I warn and warn folks that the "spin-down" (or wind-down) is when it will "get you" 90% of the time...NOT...while it is in play on the beam.

For the sake of this post (and warning that it happens to the best of us) I share the following two (of many unfortunately) accounts...

About 25 years ago a young Timberwright I had been guiding along on building his house and other projects was using a 6" big jointer (it too was a Grizzly.) For whatever reason (nobody still understands how exactly??) the 6x6, near the end of the timber jumped out of the way and my poor friend "jointed" his little finger and damaged his wrist bones. I have been told since, this is a common injury with jointers as is "pull ins" with loose garments.

This next account is two fold...first a young Timberwright...then, two weeks later a very stupid and dimwitted older one (me!) Did the exact same thing with the exact same tool. Using a Festool rabbiting power planer, our "middle finger" of the left hand got "rolled under" the spinning blade on the "rabbiting drum face" and the finger pulled it...YES...there is visible red mist in the air when this happens!!!! Fortunately we have both got to keep our finger but they resemble more what you find on a "tree frog" than a human.

I have had all manner of little nicks and scrapes...We all have those doing this type of work. Only the bloody freaking power planners have ever really "gotten me" off guard!! They are just that horridly dangerous and I rank them higher than chainsaws, old table saws, or routers in my book.

Good luck to all that own and use them!