Hi Robert...

Actually it's pretty easy to meet those standards for tectonic stability but use of dyneema static tensioning cables within the interstitial zones of the infill wall systems...That would be the quickest, but will need to be done by someone that understands these systems and also has a PE too support there work so that the building department accepts the work as viable...

The other is a 貫 (brace beam) system as we find and use in Asia...These can more than meet the load parameters they are looking for and what I would go toward first myself as a traditional and natural builder. Then I would use a cob infill system with a lime wash or alis plastering over that...

There is more to all this but it should give you some things to look into...