Your plan is workable. However, the largest problem you will have is with movement of the timber as it dries. I would suggest that you mill your timber slightly oversize, and then let it set for a year or so while it moves. This isn't long enough for something like an 8" x 8" timber to air dry to equilibrium, but some of the movement should be out of the way.

Once you start cutting joints, I would recommend some form of "square rule" joinery to account for the now out of square timber. Jack Sobon's two books probably give the most easily understandably description of the process.

From personal experience, I would suggest that you stay from tulip poplar. It twists and checks like crazy while drying. Oak is fine, and white pine appears to be even more forgiving.

Good Luck, and enjoy yourself!

[This message has been edited by Grigg Mullen (edited 11-10-99).]