Chisel Mortiser

Print Thread

Rate Thread

Re: Chisel Mortiser #8595 05/23/05 12:59 PM
Joined: Mar 2004 Posts: 79 Albany, New York area J Joel OP Member
OP Joel Member J Joined: Mar 2004 Posts: 79 Albany, New York area	Quiethouse... Thank you for thinking of me! I bought a used Makita chisel mortiser. It sounds like it is a bit different than the one you described. It does not have dials for placing the chisel. I'd be very interested in what you find out. Joel

Entire Thread
Subject	Posted By	Posted
Chisel Mortiser	Joel	08/19/04 09:13 PM
Re: Chisel Mortiser	jim haslip	08/21/04 03:46 AM
Re: Chisel Mortiser	Joel	08/28/04 12:52 PM
Re: Chisel Mortiser	Bob Smith	08/31/04 01:49 PM
Re: Chisel Mortiser	Joel	08/31/04 03:35 PM
Re: Chisel Mortiser	Bob Smith	09/01/04 04:54 PM
Re: Chisel Mortiser	gil anderson	09/01/04 06:57 PM
Re: Chisel Mortiser	Joel	09/01/04 09:23 PM
Re: Chisel Mortiser	Bob Smith	09/02/04 01:45 PM
Re: Chisel Mortiser	Bob Smith	09/02/04 01:48 PM
Re: Chisel Mortiser	Joel	09/02/04 10:13 PM
Re: Chisel Mortiser	Bob Smith	09/05/04 12:10 AM
Re: Chisel Mortiser	Will Truax	09/05/04 04:22 PM
Re: Chisel Mortiser	scott baney	09/07/04 07:18 PM
Re: Chisel Mortiser	Joel	09/08/04 12:21 PM
Re: Chisel Mortiser	Joel	09/08/04 12:30 PM
Re: Chisel Mortiser	Roger Nair	09/08/04 08:43 PM
Re: Chisel Mortiser	Joel	09/08/04 09:33 PM
Re: Chisel Mortiser	daiku	09/09/04 01:01 PM
Re: Chisel Mortiser	Joel	09/09/04 01:59 PM
Re: Chisel Mortiser	michael morningstar	09/12/04 01:08 AM
Re: Chisel Mortiser	michael morningstar	09/12/04 01:10 AM
Re: Chisel Mortiser	NC Morrison	09/24/04 01:49 AM
Re: Chisel Mortiser	quiethouse	05/22/05 11:37 AM
Re: Chisel Mortiser	Joel	05/23/05 12:59 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

PHP: 5.4.45 Page Time: 0.064s Queries: 16 (0.044s) Memory: 3.2246 MB (Peak: 3.5816 MB) Data Comp: Off Server Time: 2024-05-14 19:06:17 UTC
Valid HTML 5 and Valid CSS