hollow grind vs. flat grind - Timber Frame Forums

Register Log In Timber Framers Guild Forums Tool Forum hollow grind vs. flat grind

Print Thread

Rate Thread

Re: hollow grind vs. flat grind #9502 02/19/07 02:56 AM
Joined: Mar 2005 Posts: 77 Hartford,Ohio R Ron Mansour OP Member
OP Ron Mansour Member R Joined: Mar 2005 Posts: 77 Hartford,Ohio	thanks to everyone for all the input, it's greatly appreciated, was checking out the Tormek in one of my catalogs, and came across the Jet low rpm, 10" wet grind sharpener, seems identical to the Tormek, but $100 cheaper. Any opinions on the Jet?

Entire Thread
Subject	Posted By	Posted
hollow grind vs. flat grind	Ron Mansour	02/09/07 03:47 AM
Re: hollow grind vs. flat grind	Raphael D. Swift	02/09/07 06:46 AM
Re: hollow grind vs. flat grind	Gabel	02/09/07 01:00 PM
Re: hollow grind vs. flat grind	Tom Cundiff	02/09/07 01:31 PM
Re: hollow grind vs. flat grind	E.H.Carpentry	02/10/07 12:33 AM
Re: hollow grind vs. flat grind	pegs_1	02/16/07 02:27 AM
Re: hollow grind vs. flat grind	mo	02/16/07 04:49 AM
Re: hollow grind vs. flat grind	pegs_1	02/17/07 03:05 AM
Re: hollow grind vs. flat grind	Jed Eichel	02/17/07 02:50 PM
Re: hollow grind vs. flat grind	mo	02/17/07 04:37 PM
Re: hollow grind vs. flat grind	E.H.Carpentry	02/18/07 04:54 PM
Re: hollow grind vs. flat grind	Ron Mansour	02/19/07 02:56 AM
Re: hollow grind vs. flat grind	Jed Eichel	02/20/07 10:58 PM
Re: hollow grind vs. flat grind	brad_bb	02/21/07 06:28 PM
Re: hollow grind vs. flat grind	Jim Rogers	02/21/07 11:39 PM
Re: hollow grind vs. flat grind	Mark Davidson	02/22/07 12:27 PM

Moderated by Jim Rogers, mdfinc

Hop To

Newest Members

Bradyhas1, cpgoody, James_Fargeaux, HFT, Wrongthinker
5137 Registered Users

show/hide columns on this page

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)

PHP: 5.4.45 Page Time: 0.101s Queries: 15 (0.082s) Memory: 3.1912 MB (Peak: 3.4033 MB) Data Comp: Off Server Time: 2024-05-20 17:26:28 UTC
Valid HTML 5 and Valid CSS