Register Log In

Timber Framers Guild Forums General General Forum Questions Making pegs

Print Thread

Rate Thread

Re: Making pegs kfhines #20355 06/15/09 01:36 PM
Joined: Mar 2002 Posts: 1,696 Sneads Ferry, NC, USA J Jim Rogers Member
Jim Rogers Member J Joined: Mar 2002 Posts: 1,696 Sneads Ferry, NC, USA	Sometime ago, when we were discussing shaving horse, Tim Beal sent me some pictures of his: Attachments 100_0444-s.JPG (63.92 KB, 402 downloads) 100_0446-s.JPG (52.89 KB, 371 downloads) Whatever you do, have fun doing it!

Entire Thread
Subject	Posted By	Posted
Making pegs	Thane O'Dell	06/14/09 11:20 AM
Re: Making pegs	Will Truax	06/14/09 01:47 PM
Re: Making pegs	OurBarns1	06/14/09 01:51 PM
Re: Making pegs	Dave Shepard	06/14/09 02:39 PM
Re: Making pegs	Thane O'Dell	06/14/09 07:46 PM
Re: Making pegs	OurBarns1	06/14/09 09:46 PM
Re: Making pegs	TIMBEAL	06/14/09 11:28 PM
Re: Making pegs	Will Truax	06/15/09 03:35 AM
Re: Making pegs	TIMBEAL	06/15/09 10:19 AM
Re: Making pegs	Will Truax	06/15/09 10:44 AM
Re: Making pegs	kfhines	06/14/09 02:52 PM
Re: Making pegs	Thane O'Dell	06/14/09 07:22 PM
Re: Making pegs	kfhines	06/15/09 10:48 AM
Re: Making pegs	Jim Rogers	06/15/09 01:36 PM
Re: Making pegs	Jim Rogers	06/15/09 01:37 PM
Re: Making pegs	Dave Shepard	06/15/09 07:59 PM
Re: Making pegs	TIMBEAL	06/16/09 10:13 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Bill_Bowers, Welsing_Heritage, JRRAKE, Papaguinda, fredmaloby
5,216 Registered Users

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)

Responsive Width:

PHP: 8.3.36 Page Time: 0.050s Queries: 19 (0.034s) Memory: 3.0201 MB (Peak: 3.5657 MB) Data Comp: Off Server Time: 2026-10-31 17:53:40 UTC
Valid HTML 5 and Valid CSS