Timber Framers Guild Forums Tools Tool Forum Favorite drill bits

Print Thread

Rate Thread

Re: Favorite drill bits Gabel #22315 01/21/10 01:38 PM
Joined: Dec 2007 Posts: 1,882 Maine T TIMBEAL Member
TIMBEAL Member T Joined: Dec 2007 Posts: 1,882 Maine	A take off from Gabel's link, this bit works in a boring machine, with an adaptor, the largest size is 1-1/2" for morticing. Too bad it doesn't come in 2". http://www.irwin.com/irwin/consumer/jhtml/detail.jhtml?prodId=IrwinProd100174 Tim

Entire Thread
Subject	Posted By	Posted
Favorite drill bits	timber brained	01/19/10 03:38 PM
Re: Favorite drill bits	mo	01/19/10 05:08 PM
Re: Favorite drill bits	brad_bb	01/20/10 02:41 AM
Re: Favorite drill bits	Gabel	01/21/10 12:51 AM
Re: Favorite drill bits	TIMBEAL	01/21/10 01:38 PM
Re: Favorite drill bits	Bruce Chrustie	01/21/10 06:23 PM
Re: Favorite drill bits	TIMBEAL	01/21/10 10:18 PM
Re: Favorite drill bits	timber brained	02/01/10 02:27 PM
Re: Favorite drill bits	Bruce Chrustie	02/01/10 04:27 PM
Re: Favorite drill bits	TIMBEAL	02/01/10 07:09 PM
Re: Favorite drill bits	Gabel	02/02/10 02:32 AM
Re: Favorite drill bits	TIMBEAL	02/02/10 03:03 AM
Re: Favorite drill bits	Bruce Chrustie	02/02/10 02:35 PM
Re: Favorite drill bits	timber brained	02/02/10 10:07 PM
Re: Favorite drill bits	Bruce Chrustie	02/03/10 01:04 PM
Re: Favorite drill bits	timber brained	02/16/10 11:12 PM
Re: Favorite drill bits	Dave Shepard	02/17/10 12:25 AM
Re: Favorite drill bits	TIMBEAL	02/17/10 01:07 AM

Moderated by Jim Rogers, mdfinc

Hop To

Link Copied to Clipboard

Newest Members

JRRAKE, Papaguinda, fredmaloby, ttf5003, graymatter
5,214 Registered Users

Responsive Width:

PHP: 8.3.35 Page Time: 1.196s Queries: 18 (1.013s) Memory: 3.0190 MB (Peak: 3.5657 MB) Data Comp: Off Server Time: 2026-10-11 06:31:49 UTC
Valid HTML 5 and Valid CSS